Place your promotion here
In stock
React Weightlifting Platform
$1,295
Help
Pre Orders:
By ‘Pre Ordering’ you reserve your place in the queue for the next batch of incoming stock. There are cases where ALL the incoming stock has been Pre Ordered, so act fast and reserve yours today!
NOTE: If you order other products with your Pre Order items, these items will be held until the Pre Order products becomes available as a default.
If you’d like them shipped earlier, please contact us on 1300 85 40 50 or email [email protected]. Additional shipping may apply.
Made to Order:
Contact 1300 85 40 50 or email [email protected] for details on lead times and availability.
React Weightlifting Platform is available to buy in increments of 1
Product Description
High performance Platform made easy
A bigger, thicker and meaner version of our React Deadlift Platform - now with 50mm thick rubber, specifically designed for Olympic lifts in mind. Using the same interchangeable design and ClearDotâ„¢ connecting system, the React Weightlifting Platform can be assembled by anyone in a few minutes on top of your regular flooring.Â
With a massive 2.5m wide x 1.5m deep lifting area, there's plenty of room for shifting positions between lifts, and for the bar to bounce around.Â
The underside of each tile ensures a no-gap consistent surface, with the pattern underneath designed with noise proofing in mind, minimising both barbell bounce and the noise from crashing weights.
Our React Flooring and Platforms are tailor made for serious training with a slip resistant surface, extreme durability and optimal shock absorption, ensuring minimal energy loss and maximum ground reaction force.Â
As a default, the iconic Iron Edge logo is featured on the bottom left corner. For a more personalised touch, we can add in your own custom logos and colours.
SPECS
- Platform Dimensions
- 3m long x 2m deep x 50mm thick including ramps
- 2.5m long x 1.5m deep excluding ramps
- Border Ramp - 25cm width (4x100cm, 2x50cm, 4x corners)
- Layers
- Top wear layer: 1.5mm of EPDM grey mix
- Bottom layer: Recycle SBR + recycle random multicolour EPDM
INSTALLATION
- Innovative four pronged connectors to ensure no gaps between tiles (supplied)
- No adhesives required
- Intelligent ‘clip-in’ ramps transition from the ground to Platform
- Suitable for wheelchairs, and DDA compliant
- Simple, fast and cost-effective DIY installation process
- What are the acoustic properties
- Sound transmission class: 61
- Impact insulation class: 58
- Impact sound improvement: ΔLw27dB
- What are the fire rating specs
- With a sprinkler system
- CRF: 3.71kW/m²
- Smoke value: 518.3%
- Without a sprinkler system
- CRF: 3.14kW/m²
- Smoke value: 628%
- With a sprinkler system
- What's the best way to clean the React Tiles
- Sweep off loose debris
- Clean with a damp cloth or mop. A pH neutral soluion can be used
- Liquid wax can be applied to act as a sealant
- Can I pick these up
- Sorry, but we cannot accommodate pick ups. We can ship all over Australia though!
Â
Â
Â
Enter your postcode for a delivery fee estimate:
1. Peace of Mind
With over 500,000 satisfied customers, Iron Edge is Australia's No.1 high performance strength training brand. We've been fitting out elite high performance gyms for the likes of Collingwood Football Club and the Australian Defence Forces for years. We know what you need and what you don't. Our products are constantly being tried, tested and improved to be the best they can be. And we stand behind them accordingly.
2. Product Range
Iron Edge has one of the biggest ranges of high performance training equipment available in Australia. From Nike Romaleos weightlifting shoes, through to kettlebells, Power Bands and weightlifting equipment. In all we stock 100’s of different products at our warehouse facility in Melbourne so you'll always be able to get what you want and, most importantly, when you need it. That's why Iron Edge is the choice of Australia's best athletes, coaches and gyms. And why anything else is just compromise.
3. Engineering
At Iron Edge we employ experienced and qualified engineers to design, test and then source the best manufacturers of all our equipment. Up until 2017 we manufactured in-house, but market pressures forced us to move manufacturing overseas. However we weren’t going to compromise on the quality and structural integrity of our products, so after rigorous research, we’ve been able to partner with some of the industry’s best and most experienced equipment manufacturers. In many ways they are more advanced and sophisticated than our in-house work shop, so you can be assured that the quality of all our products meet the same high standards and are worthy of the Iron Edge brand.
4. Expertise
When you promise 'serious training' you have to back it up. Fortunately we do, drawing on our extensive experience dealing with Australia's best coaches, athletes, sports scientists and exercise physiologists. It's enabled Iron Edge to be one of Australia's leading authorities in high performance strength training- and with an educational arm of the business comprised of over ten certified courses launching soon, we plan on increasing the industry standard across the board.
5. No 'BS' Guarantee
We don't just say our products are the best available. We back it up with an industry leading guarantee. That means if your Iron Edge equipment is faulty or fails to deliver on its promise we will replace it. Conditions do apply.
6. TradePass
TradePass is more than just a FREE discount pass for fitness industry professionals. It entitles holders to unique offers based on their industry role plus event invitations. It's available to selected gyms, personal trainers, exercise physiologists, exercise scientists, sporting organisations, osteopaths, chiropractors, physiotherapists, the ADF, police, fire fighters, ambulance and Crossfit affiliates. You just need a relevant fitness certificate, ABN (or defence email address for ADF members). Click here for details.
7. Daily Dispatch
Most orders will ship from our warehouse SAME DAY (Monday- Friday) if place before 11am.
Though larger palletised orders are likely to take longer.
Details on Australia wide delivery times can be found on our Shipping Information page
React Deadlift Platform Previous 
Product Description
High performance Platform made easy
A bigger, thicker and meaner version of our React Deadlift Platform - now with 50mm thick rubber, specifically designed for Olympic lifts in mind. Using the same interchangeable design and ClearDotâ„¢ connecting system, the React Weightlifting Platform can be assembled by anyone in a few minutes on top of your regular flooring.Â
With a massive 2.5m wide x 1.5m deep lifting area, there's plenty of room for shifting positions between lifts, and for the bar to bounce around.Â
The underside of each tile ensures a no-gap consistent surface, with the pattern underneath designed with noise proofing in mind, minimising both barbell bounce and the noise from crashing weights.
Our React Flooring and Platforms are tailor made for serious training with a slip resistant surface, extreme durability and optimal shock absorption, ensuring minimal energy loss and maximum ground reaction force.Â
As a default, the iconic Iron Edge logo is featured on the bottom left corner. For a more personalised touch, we can add in your own custom logos and colours.
SPECS
- Platform Dimensions
- 3m long x 2m deep x 50mm thick including ramps
- 2.5m long x 1.5m deep excluding ramps
- Border Ramp - 25cm width (4x100cm, 2x50cm, 4x corners)
- Layers
- Top wear layer: 1.5mm of EPDM grey mix
- Bottom layer: Recycle SBR + recycle random multicolour EPDM
INSTALLATION
- Innovative four pronged connectors to ensure no gaps between tiles (supplied)
- No adhesives required
- Intelligent ‘clip-in’ ramps transition from the ground to Platform
- Suitable for wheelchairs, and DDA compliant
- Simple, fast and cost-effective DIY installation process
You Might Also Like
Related Products