In stock
Linear Leg Press - Onyx Series
Fulfill that pressing need for strong legs
Whether you or your clients are lifting light weights or "light weight buddy!" you can't go past a leg press for loading up otherwise unattainable amounts of weight in a safe manner.
Our signature ultra-smooth bearings eliminate drag, providing a natural free weights feel not normally associated with machines.
A handy feature for researchers and sport scientists, we can change the angle of the leg press from 35 degrees to 45 degrees along with the foot plate from 80 to 100 degrees by request! This will add some lead time compared to a regular order, but if you're conducting standardised testing will save you a small fortune on specially designed equipment.
NOTE - The commercial pieces can be difficult to install, but are well worth it! We strongly recommend hiring a professional to assemble these, which we can provide as an additional service.
Size
- Set Up Size: 2490 x 1485 x 1350mm
- Net weight: 255kg
- Main Tube: D90 x 130 x 3.0mm, 50 x 100 x 3.0mm
Specs
- Starting weight: 47kg
- Japan THK importing bearing
- Default angle 35 degrees
- Stainless steel loading bars
- Stainless steel bolts
- Seat adjusts to 3 different angles
- Plate pins
- Front = 38cm each
- Back = 42cm each
- Storage = 20cm each
Â
Financing
We're partnered with Stratton Finance who offer market leading rates, flexibility with loan structures and no fees for early payout. Contact us for a quote, or Stratton directly on 0414 972 260, or [email protected]
- How far does the seat move
- The seat can adjust 3 levels
- Range = 39 degrees to 49 degree incline
- What's the starting weight
- 47kg
- What's the weight capacity
- It'll vary depending on what plates you're using, and using what horns. Using our Elite or Competition Bumper Plates you could fit:
- 165kg on each of the back horns (6 x 25kg and 1 x 15kg)
- 2 horns
- 150kg on each of the front horns (6 x 25kg)
- 2 horns
- 75kg on each of the storage horns (3 x 25kg)
- 4 horns
- 165kg on each of the back horns (6 x 25kg and 1 x 15kg)
- It'll vary depending on what plates you're using, and using what horns. Using our Elite or Competition Bumper Plates you could fit:
- Where are the catch positions
- Measuring from the backrest:
- Bottom "fail" position - 455mm
- Bottom catch position - 751mm
- Top catch position - 980mm
- Measuring from the backrest:
- How comfortable is the seat
- Hard to put a number on comfort, but we use anti-corrosion PVC Leather that's 1.2mm thick on the outside of the seat, and high density PU foam on the inside for cushioning
Â
Â
Â
Â
1. Peace of Mind
With over 500,000 satisfied customers, Iron Edge is Australia's No.1 high performance strength training brand. We've been fitting out elite high performance gyms for the likes of Collingwood Football Club and the Australian Defence Forces for years. We know what you need and what you don't. Our products are constantly being tried, tested and improved to be the best they can be. And we stand behind them accordingly.
2. Product Range
Iron Edge has one of the biggest ranges of high performance training equipment available in Australia. From Nike Romaleos weightlifting shoes, through to kettlebells, Power Bands and weightlifting equipment. In all we stock 100’s of different products at our warehouse facility in Melbourne so you'll always be able to get what you want and, most importantly, when you need it. That's why Iron Edge is the choice of Australia's best athletes, coaches and gyms. And why anything else is just compromise.
3. Engineering
At Iron Edge we employ experienced and qualified engineers to design, test and then source the best manufacturers of all our equipment. Up until 2017 we manufactured in-house, but market pressures forced us to move manufacturing overseas. However we weren’t going to compromise on the quality and structural integrity of our products, so after rigorous research, we’ve been able to partner with some of the industry’s best and most experienced equipment manufacturers. In many ways they are more advanced and sophisticated than our in-house work shop, so you can be assured that the quality of all our products meet the same high standards and are worthy of the Iron Edge brand.
4. Expertise
When you promise 'serious training' you have to back it up. Fortunately we do, drawing on our extensive experience dealing with Australia's best coaches, athletes, sports scientists and exercise physiologists. It's enabled Iron Edge to be one of Australia's leading authorities in high performance strength training- and with an educational arm of the business comprised of over ten certified courses launching soon, we plan on increasing the industry standard across the board.
5. No 'BS' Guarantee
We don't just say our products are the best available. We back it up with an industry leading guarantee. That means if your Iron Edge equipment is faulty or fails to deliver on its promise we will replace it. Conditions do apply.
6. TradePass
TradePass is more than just a FREE discount pass for fitness industry professionals. It entitles holders to unique offers based on their industry role plus event invitations. It's available to selected gyms, personal trainers, exercise physiologists, exercise scientists, sporting organisations, osteopaths, chiropractors, physiotherapists, the ADF, police, fire fighters, ambulance and Crossfit affiliates. You just need a relevant fitness certificate, ABN (or defence email address for ADF members). Click here for details.
7. Daily Dispatch
Most orders will ship from our warehouse SAME DAY (Monday- Friday) if place before 11am.
Though larger palletised orders are likely to take longer.
Details on Australia wide delivery times can be found on our Shipping Information page
Fulfill that pressing need for strong legs
Whether you or your clients are lifting light weights or "light weight buddy!" you can't go past a leg press for loading up otherwise unattainable amounts of weight in a safe manner.
Our signature ultra-smooth bearings eliminate drag, providing a natural free weights feel not normally associated with machines.
A handy feature for researchers and sport scientists, we can change the angle of the leg press from 35 degrees to 45 degrees along with the foot plate from 80 to 100 degrees by request! This will add some lead time compared to a regular order, but if you're conducting standardised testing will save you a small fortune on specially designed equipment.
NOTE - The commercial pieces can be difficult to install, but are well worth it! We strongly recommend hiring a professional to assemble these, which we can provide as an additional service.
Size
- Set Up Size: 2490 x 1485 x 1350mm
- Net weight: 255kg
- Main Tube: D90 x 130 x 3.0mm, 50 x 100 x 3.0mm
Specs
- Starting weight: 47kg
- Japan THK importing bearing
- Default angle 35 degrees
- Stainless steel loading bars
- Stainless steel bolts
- Seat adjusts to 3 different angles
- Plate pins
- Front = 38cm each
- Back = 42cm each
- Storage = 20cm each
Â
Financing
We're partnered with Stratton Finance who offer market leading rates, flexibility with loan structures and no fees for early payout. Contact us for a quote, or Stratton directly on 0414 972 260, or [email protected]