Level up your training space.

Blurring the line between free weights and plate loaded/pin loaded machines, cables allow for the adjustment of the line of resistance to target different muscles and movements you otherwise can’t hit using standard free weight training and gravity.

Replicate on field movements with cable chops at various angles to engage the trunk in more realistic motions compared to your standard bridges and planks.

Smooth bearings allow the handles to rotate, providing a more comfortable feel.

Try chops as the secret sauce to your training.

Specifications:

Diameter of rubber grip - 32mm
Diameter of center - 25mm
Length - 1035mm
Weight 3.1kg

Level up your training space.

Blurring the line between free weights and plate loaded/pin loaded machines, cables allow for the adjustment of the line of resistance to target different muscles and movements you otherwise can’t hit using standard free weight training and gravity.

Ever tried lifting weights with your ankles?

Doesn't work well. Use this instead.

- Streamlined vertical design for high visibility

- Wall mounted to preserve floorspace

- 6 x pins for various attachments

A place for everything - everything in its place 

Keep your gym organised and tidy with our Cable Attachment Storage.

The wall mounted design frees up precious floor space that you'd rather spend on more exciting pieces. With a streamlined vertical orientation, your cable attachments can be seen from a mile away, so there's no more treasure hunts for your preferred attachment.

Bolted next to your Cable Machines or Lat Pulldown / Seated Row, you'll have all the attachments you need within arms reach.

Specs:

• Size: 1190mm x 139mm x 178mm
• 6 x pins
• Pin length: 145mm
• Pin diameter: 10mm
• Pin spacing: 180mm

- Convert cables from 2:1 to 1:1 ratio

- Merge 2 pulleys into one handle, or vice versa

- Simple to use

- Compatible with all Iron Edge Cables

- Rounded edges resist scratching

Adapt and grow

Connect two separate pulleys together to form a single pulley point, immediately converting your Cables from a 2:1 ratio to 1:1. 

Two pairs of holes act as anchoring points for your carabiners, so they can lock in at the desired angle. Clip your desired attachment to the single hole, and away you go! Or vice versa - connect one carabiner to the middle attachment point, and use both attachments at the same time.

An easy solution for extra heavy rows, pulldowns and face pulls. Don't settle for good enough. By spreading the angles of your attachments to suit, find the perfect positioning for each exercise and get the most out of every session.

Carabiners come included.

Specs:

• Dimensions: 190mm x 80mm x 8mm thick
• Made from steel
• Compatible with all Iron Edge Cables
• Carabiners included
• Hole diameter: 18mm
• Hole spacing
  • Inner - 110mm centre to centre
  • Outer - 160mm centre to centre

Level up your training space.

Blurring the line between free weights and plate loaded/pin loaded machines, cables allow for the adjustment of the line of resistance to target different muscles and movements you otherwise can’t hit using standard free weight training and gravity.

Get a grip with the most versatile cable attachments in the gym.

Double up for two arm exercises.

Level up your training space.

Blurring the line between free weights and plate loaded/pin loaded machines, cables allow for the adjustment of the line of resistance to target different muscles and movements you otherwise can’t hit using standard free weight training and gravity.

Tricep Ropes are the most popular Cable Attachment in just about any gym.

Our version is strong, comfortable and has rubber cabs for a secure grip.

Level up your training space.

Blurring the line between free weights and plate loaded/pin loaded machines, cables allow for the adjustment of the line of resistance to target different muscles and movements you otherwise can’t hit using standard free weight training and gravity.

Tricep Ropes are the most popular Cable Attachment in just about any gym.

Our version is strong, comfortable and has rubber cabs for a secure grip.

Get a grip and keep it

The most comfortable pulldown and row handles on the market! Our Scap Bars are designed to force your lats and traps to engage, so you're actually hitting the muscles you set out to train.

The molded handles on each side allow for a comfortable, non-slip grip; helping lock your hands in position.

Packaged as a set of 3, so you've got close, medium and wide grip options.

Specs

• Close grip: 30cm wide x 16.5cm high @ 3kg 
• Medium grip: 55cm wide x 11cm high @ 3.05kg
• Wide grip: 83cm wide x 11cm high @ 3.9kg

Get a grip and keep it

Staple attachments in gyms across the world - the V Handle attachment places your wrists in a comfortable neutral position with a close grip. As a general rule of thumb, the closer the grip the more emphasis on the lats and upper back muscles such as traps and rhomboids.

The V Handle is a go-to for teaching clients how to engage their scapula when pulling, rather than relying on their arms - there'll be time for curls later!

The stylish black e-coating won't chip unlike standard chrome designs, meaning this will look fresh after years and years of being tossed around.

Featuring rubber grips, no moving parts and a compact design, the V Handle is basically unbreakable and demands a place in your gym.

The best way to be weighed down

Turn any Armour Rack into a Lat Pulldown machine with our Pulldown attachment.

In addition to our traditional lock-fast system, we've included a screw-tightening mechanism to ensure utmost stability. Very handy when pulling down weights heavier than your whole body!

The pads have been designed to be comfortable to use while keeping the lifter securely locked in place and maintaining structual integrity.  

Get the most out of your Armour Rack with our Pulldown and Seated Row attachments.

Specs:

• 460mm wide x 500mm deep x 300mm high
  • 340mm deep from front of upright
• Attaches to any Iron Edge upright
  • 65mm x 65mm
  • 26mm diameter holes
• Medium density polyurethane roller pads
• Laser cut logos

The best way to be weighed down

Turn any Nexa Rack into a Lat Pulldown machine with our Seated Row attachment.

In addition to our traditional lock-fast system, we've included a screw-tightening mechanism to ensure utmost stability. 

Get the most out of your Nexa Rack with our Pulldown and Seated Row attachments. Bench sold separately.

Specs:

• 630mm wide x 350mm high x 480mm deep
• Attaches to any Iron Edge upright
  • 65mm x 65mm
  • 26mm diameter holes
• Laser cut logos

The upper body squat

The dip has a strong reputation as an outstanding bodyweight exercise for conditioning the shoulder girdle. It develops pushing power through the vertical plane and provides an ideal complement movement to pull-ups.

Now with the new Iron Edge Dip bar attachment, adding dips to your training arsenal is easy. The dip bar has been designed, engineered in Australia to accessorise the Matrix, Iron Cage and Assault Racks. Using a revolutionary Lock-Fast™ system unique to Iron Edge, the bars can be fitted securely and snuggly in an instant with a simple push and twist. No bolts, no tightening and no wasted time. It’s the same system you’ll see on our J-Cups and Spotting arms.

Iron Edge Dip Bar handles have a fixed circumference and project outwards at an angle. The further out you grip, the wider the space between the bars. It makes them suitable for people of all sizes and allows you to experiment with multiple grip widths.

Specs

• Compatible with any Iron Edge rack
  • Fits uprights measuring 65mm x 65mm
• Weight rating: 400kg

Our Racks, including the Matrix, allow you to position the Torsonator™ sleeve(s) in any one of the holes on the uprights. This allows you to set various heights to target different muscle groups and movement patterns.

The Racks also provide an anchor point for the use of bands with the Torsonator™. Adding band resistance to a range of Torsonator™ exercises adds a whole new dimension the your training.

Deceptively versatile, the Iron Edge Roller Pad is intended with single leg work in mind but can also be used for Nordic hamstring work, hip thrusts and ab work. 

If we think of pure strength and pure balance as opposites on a continuum (with say, a powerlifting-style squat on one end and a single leg Bosu squat on the other), we want to train within our relative range that applies to our given sport / task. 

Our Roller Pad incorporates more balance than a powerlifting-style squat (because who has the time to belt up when on the field or court) and more strength than a single leg Bosu squat (because…well, anything would), bringing your training to that sweet spot of specificity. 

Is it a Bench Pull? Is it an Incline Bench? No wait, it also works for Hip Thrusts, Preachers and more!

More space and budget friendly than a standard Bench Pull set up, the Lynch Pad allows supported rowing movements to be performed with a full range of movement – something simply not possible with a regular Incline Bench (even for T-Rex armed lifters).

Easy to move and adjust, the Lynch Pad is incredibly handy for circuits, small groups or solo lifters after a space-efficient Bench Pull.